Close

Dynamic and Static End Loads


Driving Pulley Diameter:(mm)
Driving Speed:(rev/min)
Driven Pulley Diameter:(mm)
Absorbed Power:(kW)
Service Factor:
Centre Distance:
Number of Belts:
Belt Section:



Min. Setting Force:0.00 kgf
Dyn/Static End Loads: N / N


Home | Heritage | Quality Assurance | Distributors | News | Contact Us | Drive Designer | Site Map | Follow FPTGroup on Twitter

© 2012 ERIKS UK. All rights reserved. All trademarks acknowledged. Fenner is a registered trademark of J. H. Fenner & Co. Limited. |2552